Stress-deformable state of isotropic double curved shell with internal cracks and a circular hole

This work is devoted to the stress–strain state of isotropic double curved shell with defect system. The construction is weakened by two non-through thickness (internal) cracks of different length and by a circular hole located between cracks. In this study we use the line-spring model. Within the framework of this model cracks are modeled as mathematical cuts of shell’s middle surface. This leads to a two-dimensional problem. The problem is reduced to a system of eight boundary integral equations. To ensure the uniqueness of solution an additional equation is added. In the numerical solution of the problem special quadrature formulas for singular integrals of Cauchy type and the finite difference method are applied. The influence of defects on each other for double curved shell has been investigated. The given theoretical results can be used for the calculation of structural elements with holes, cracks on the strength and fracture toughness in various branches of engineering.     

A New Comb Circular Polarizer Suitable for Millimeter‐Band Application

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter‐band application because of its simple structure and low fabrication cost. In our experiments the dual‐band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.     

Eigenspannungen als Messgröße zur Qualitätssicherung

Residual stress as measured quantity in quality assurance The x‐ray method is used in the Volkswagen Automotive Group at different world‐wide locations as a standard procedure to determine residual stress. As an important measured quantity in the quality assurance residual stresses are specified in drawings of different components (e.g. gears, coil springs). Measurements are carried out during quality assurance, production, damage analyse, technical development department and design control of components from suppliers. An optimum efficiency can be achieved, if it exists a unique correlation between residual stress values and loading capacity of components, and if the processes to introduce residual stress can be optimized using residual stress measurements during the production.     

连轧机用人字轮齿轴断裂失效分析

用宏观断口分析、化学检验、力学性能测定、低倍检查、金相组织及夹杂物评定鉴别、受力分析及强度寿命定量估算的方法，对人字轮被动齿轴端断裂失效原因进行分析，并提出改进措施。     

碳纤维缠绕复合材料在潜水外压容器上的应用

在铝合金圆筒体外以浸渍树脂碳纤维进行缠绕复合增强，增强后的筒体耐静水外压能力大幅度提高；整体缠绕的全复合材料筒体，在耐静水外压能力及减轻自身重量方面也获得了明显的效果。此外，在铝合金细长圆管的外壁复合缠绕碳纤维，能有效地提高圆管对轴向压载荷的抗失稳与抗屈曲破坏能力。     

齿轮磨前滚刀的齿形研究

本文介绍了磨前滚刀滚切齿轮的最大根切量和磨后的渐开线长度计算,并建立了数学模型。为更加直观起见,还建立了模拟滚齿的数学模型。并在实验的基础上提出了参考标准。     

大型对开组合齿圈工艺设计分析及其最优化

本文论述了大型齿圈的结构特征及其现行工艺的合理性；在建立工艺关键环节概念的基础上提出工艺优化方案。并从理论上论证了实现最优化的充分可能性。     

冶金机械设备齿轮减速器的润滑

阐述了冶金设备齿轮减速器润滑问题的重要性，分析了齿轮润滑的主要状态和润滑对齿轮传动的影响，简述了冶金设备齿轮减速机的工作特点及对润滑油性能的要求和选用。     

蜗杆副的跑合工艺

叙述了蜗杆副跑合的目的、作用以及跑合过程的特点和跑合中应重视的几个问题。     

一种新型润滑油添加剂的质谱研究

采用独特的分离方法和途径，综合使用多种质谱分析技术，如电子轰击谱（ＥＩ／ＭＳ）、场解吸谱（ＦＤ／ＭＳ）、快速原子轰击谱（ＦＡＢ／ＭＳ）、色／质联用等，对高档齿轮油的主剂－含磷极压剂的结构组成进行了较为详尽的分析研究，提出了复酯胺盐的结构组成。